- 
        
            
                Uncategorized
            
        
        - 
                    
                        
                        Section 1.0 — Dress Standard, Induction and Sign-On10 xp
- 
                    
                        
                        Section 2.0 — OH&S Site Induction
- 
                    
                        
                        Section 3.0 — ASC247 / Retail Client Site On-Site Cleaning Manual
- 
                    
                        
                        Section 4.0 — Correct Chemical Usage and Safety
- 
                    
                        
                        Section 5.0 — Equipment Care, Maintenance and Troubleshooting
- 
                    
                        
                        Section 6.0 — Trading Floor Cleaning Process
- 
                    
                        
                        Section 7.0 — Amenities Cleaning Process
- 
                    
                        
                        Section 8.0 — Office and Tea Room Cleaning Process
- 
                    
                        
                        Section 9.0 — Window Cleaning Process
- 
                    
                        
                        Section 10.0 — Specifications and Cleaning Schedules
- 
                    
                        
                        Certification Statement - Retail Cleaning Training
 
- 
                    
                        
                        
Section 7.0 — Amenities Cleaning Process
- 
Check ceiling vents and dust with a dust brush as required prior to commencing any other process. 
- 
Wipe all partition tops and tops of mirrors and doors. 
- Wipe over all partitions and doors to remove any dirt or marks. 
Basins should be cleaned using Resolve and/or Lemon Disinfectant.
- 
Spray basins liberally and use a cloth or the centre of a red scrubbing pad or steel wool to remove any dark rings or stains. 
- 
Pay particular attention to areas around tap fittings. 
- 
Rinse with clean water and dry with paper towel or cloth. 
- Urinal sides, bases, steps and wall-mounted urinals are to be cleaned using Resolve and a toilet brush. 
Toilet suites should be cleaned using Resolve and/or Lemon Disinfectant.
- 
Apply liberally to inside of bowls. 
- 
Scrub with a toilet brush. 
- 
Flush to remove any residue. 
- 
Wipe inside and outside of bowls and cistern with paper towel or cloth. 
- Use a spray bottle with Lemon Disinfectant or Resolve and spray walls, a section at a time. - 
Wipe clean using paper towel or a cloth. 
- 
Ensure all areas are completed, including under hand dryers and under sinks. 
 - Add 100ml of Lemon Disinfectant or Resolve to a bucket and fill with clean hot water. - 
Mop all corners and edges, including behind toilet bowls. 
- 
Mop the entire floor thoroughly. 
- 
Use steel wool to remove any build-up in corners or edges. 
 - This should be your final step in the process. - IMPORTANT: 
 RED Bucket and RED Mop MUST be used for Amenities ONLY.
 DO NOT use the same mop and bucket for ANY OTHER AREA.- Locker rooms: - 
Wipe down all walls and doors in locker rooms. 
- 
Remove any dirty marks or stains using Resolve. 
- 
Place 40ml of Neutral Cleaner in a bucket and fill with warm water. 
- 
Mop all locker room floors, including corners and edges. 
- 
Use steel wool to remove any build-up in corners and edges. 
- 
Dust door grills (if applicable) with a dust brush or wipe with a damp cloth. 
- 
Clean door push plates with glass cleaner and paper towel or a clean cloth. 
 
 - Section 7.0 — Assessment- Outcomes: - At the end of this session, a participant will be able to: - 
Identify and use the correct equipment, chemical and process required to clean amenities. 
- 
Identify the related hazards. 
 
- 
| Views | |
|---|---|
| 1 | Total Views | 
| 1 | Members Views | 
| 0 | Public Views | 
| Actions | |
|---|---|
| 0 | Likes | 
| 0 | Dislikes | 
| 0 | Comments | 
Share by mail
Please login to share this webpage by email.